Laboratory Ultra Pure Deionized Water Purification System for DNA Rna Analysis

1 / 5

Laboratory Ultra Pure Deionized Water Purification System for DNA Rna Analysis

Customization:	Available
Certification:	ISO9001, CE
Salt Rejection Rate:	99.0%

Send Inquiry

Product Description

Basic Info.

Model NO.

OK-HP10

Application

Laboratory

Capacity

10L/H

Rated Power

50W

Water Output Type

RO and Ultra-Pure Water

up Water

Resistivity 18.25mohm-Cm at 25 Celsius Degree

Total Organic Carbon

1-3ppb

Feed Water Requirements

Tap Water, Pressure 0.15-0.35MPa

Specification

540*400*500mm

HS Code

2853001000

Production Capacity

200sets/Month

Product Description

🔬

New Arrival Laboratory Ultra Pure Deionized Water Purification System For DNA RNA Analysis
Using advanced reverse osmosis technology and ultra-purification column with original formula filler, this system provides a comprehensive solution for laboratory water requirements.

This series of machine uses tap water as source water. It simultaneously prepares 18.2 MOhm-cm ultrapure water and RO pure water. The output reaches or exceeds the quality standards of China laboratory water (GB6682-2008) and ASTM, CLSI, and ISO3696 levels. The system is designed to be compact and easy to operate.

Technical Parameters

Model	OK-HP10	OK-HP20	OK-HP30
Output	10L/h	20L/h	30L/h
Feed water requirements	Tap water, temperature 10~35ºC, pressure 0.15-0.35Mpa; TDS: ≤200mg/L
Ultrapure water quality
Resistivity(25ºC)	18.2MOhm-cm
Total organic carbon TOC	1-3 ppb
Bateria	<1CFU/ml
*Dimension(LWH-mm)*	540400500
Standard configuration	Main body, pressure tank

*The conductivity of RO water is affected by the inlet conductivity of tap water.
**The TOC value is affected by inlet conditions and the sampling environment.

Frequently Asked Questions

Q: What is the resistivity of the ultrapure water produced by this system? A: The system produces ultrapure water with a resistivity of 18.25 MOhm-cm at 25 degrees Celsius.

Q: What type of source water is required? A: The system uses standard tap water with a pressure requirement of 0.15-0.35 MPa.

Q: Does the system produce both RO and ultrapure water? A: Yes, the system provides both Reverse Osmosis (RO) pure water and Ultra-Pure water outputs.

Q: Is this system suitable for DNA and RNA analysis? A: Absolutely. It is specifically designed for high-precision laboratory applications including DNA/RNA analysis, where very low TOC and high resistivity are required.

Q: What are the TOC levels of the produced water? A: The Total Organic Carbon (TOC) levels are maintained between 1-3 ppb.

Q: What is included in the standard configuration? A: The standard package includes the main machine body and a pressure tank for water storage.